Liquefaction Plant 10000 Nm3/h YPO-10000 Liquefaction Oxygen Equipment
Specifications:
The followings are the standard products for the Liquefaction Oxygen Equipment YPO series which are manufactured by our company. Regarding other particular product can be calculated and designed according to the actual requirements.
| MODEL CONTENTS | YPO-2000 | YPO-2500 | YPO-3600 | YPO-4500 | YPO-5000 |
| LOX flow | Nm3/h | 2000 | 2500 | 3600 | 4500 | 5000 |
| LOX purity | ppm | Same as the feed air | Same as the feed air | Same as the feed air | Same as the feed air | Same as the feed air |
| LOX pressure | MPa | ～0.2 | ～0.3 | ～0.2 | ～0.2 | ～0.2 |
| Subcooled | K | 3 | 3 | 3 | 3 | 3 |
Typical Product:10000 Nm3/h YPO-10000 Liquefaction Oxygen Equipment
Output, purity and pressure
| | Flow (Nm3/h) | Purity | Pressure MPa(G) | Subcooled (K) |
| LOX | 10000 (g) | Same as the feed air | 0.2 | 3 |
Note: 1. Nm3/h is defined as the volume at 0℃, 101.3kPa(A) (same as below);
2. The liquid output is calculated from data of gas, and the pressure is calculated with 0 meter high at outlet of cold box.
3. All pressures which are not specially defined below are the gauge pressures.
Description:
The throttled low pressure gaseous nitrogen is compressed through the gas transmission section of nitrogen turbo-compressor, and then mixed with the refluxed gas of liquefaction plant. The gas is divided into two streams after being compressed with the circulating section of nitrogen turbo-compressor. One stream is fed to the high temperature expander to be expanded after being cooled in the main heat exchanger, and then it goes out of cold box and back to the inlet of circulating section of nitrogen turbo-compressor after being rewarmed in the main heat exchanger; the other stream enters into the cooler to be cooled after being boosted through the boosting ends of high temperature expander and low temperature expander, and then it goes out of cold box after being rewarmed in main heat exchanger. A part of nitrogen is liquefied, and then goes into the gas-liquid separator. The liquid nitrogen in the separator is subcooled in the liquid nitrogen subcooler, and then flows into the oxygen heat exchanger to cool the gaseous oxygen, part of which is extracted and back to the main heat exchanger as reflux gas, and the rest liquid nitrogen flows out of heat exchanger and goes back to the inlet of circulating section of nitrogen turbo-compressor
Applications:
1. Water and wastewater treatment
2. Welding and metal processing
3. Pharmaceutical and biotechnology
4. The complete set of air separation plant and accessory equipments are the necessary important
technical equipments for the basic industry (metallurgy, chemical industry, etc.) of national economy and tech fields (aerospace aviation, nuclear submarine, etc.)
5. Coal gasification projects
Competitive Advantage:
1. Engineers available to service machinery overseas
2. All gas and liquid plants are optimized to meet customer-specific site requirements
3. Low Operating Cost
4. Powerful manufacturing capacity
5. Impeccable quality management system
6. Our company is the biggest air separation plant design and manufacture base
Product Tags:
|
|
Low pressure gas liquefaction plant 10000 Nm3/h , air separation plant Images
|
